|
|
|
|
| Performance |
| |
 |
|
76° Cross Induction
Setting cylinders in a 76oV shape makes the engine more compact, while the cross air induction enhances intake efficiency for easier starting, faster acceleration, smoother operation and better economy. |
|
|
High-Precision Intake and Exhaust Tuning
Radically modified intake and exhaust passages increase combustion efficiency for maximum performance and better economy.
|
| |
| Comfort |
| |
Rigid and Lightweight Top Cowling
The top cowling is specially designed to control engine noise and keep water out.
 |
|
Counter-Rotation System
Motors are available with counter-rotation to maintain a neutral helm in twin mountings. By contrast, a pair of clockwise-rotating propellers causes the boat to turn to port. |
|
|
Vibration Reduction System
The large rubber mounts and the long vertical length between the upper and lower mounts serve to reduce vibration.
Idle Labyrinth Exhaust Chamber
When the engine is idling, exhaust gas is expanded through a labyrinth, greatly reducing noise.
|
| |
| Convenience |
| |
 |
|
Multi-Function Tiller Handle
The shift lever, throttle friction function, neutral throttle limiter, and engine stop switch lanyard are all conveniently located on the tiller handle. |
 |
|
Prime Start Auto™ Choke
The computer supplies the proper amount of fuel and sets optimal ignition timing, ensuring quick starts at the turn of the key. |
 |
|
Engine Stop Switch Lanyard
This lanyard clips to clothing or around the wrist, stopping the engine automatically if the operator leaves the helm. |
Wide Range PTT
Allows trim all the way to -4o. Negative trim increases acceleration and reduces planning time. Power tilt means effortless trim and tilt adjustment.
|
|
 |
|
Energy Advisor Mark
The throttle is marked to show the most fuel-efficient operating position. |
 |
|
360° Steering
Full circle steering means exceptional maneuverability and reverse without the need to shift gears. |
 |
|
Built-In Fuel Tank
A fuel tank is provided inside the cowling, eliminating the need for a separate tank and saving space inside the craft. |
Shallow Water Drive
The outboard can be lifted and set at an angle, preventing it from hitting the bottom when operating in shallow water.
|
| |
| Reliability |
| |
Overheat Warning
If the water inlet is blocked, this system prevents overheating by reducing engine speed and warning the operator by means of a light and/or buzzer.
 |
|
Magnetic Drain Plug
The oil plug is magnetized to collect any metallic particles in the oil, keeping them from circulating and causing damage to the gears. |
|
|
Over-Rev Limiter
Acts automatically to stop over-revving caused by cavitations, and so on, to prevent damage.
Oil Seal Protector
This protector prevents the oil seal from becoming damaged by leakage of oil if a fishing line wraps around the propeller. |
|
